Bulk-Granular/Liquids Unloading Facility

Bulk-Granular/Liquids Unloading Facility

This is just the bulk-granular/liquids unloading portion of my 'Long Factory' (kuid2:124017:10053:1). One end of the pipe-bridge is not finished since it would normally be embedded inside a building and would not be seen; that building should be at least 21.6' (6.6m) high.

I had originally created this for unloading granular plastic pellets from covered hoppers (see http://www.all-con.com/materials/ballcorp_case_history.pdf for some decent pictures of the kind of facility I modelled). It should be reasonably accurate for the unloading of any bulk granular product, and it could also be used as a facility for unloading liquid products from tank-cars.

size: 73.3' L x 40.5' W x 40' H (22.3m x 12.3m x 12.1m)
polygons: 3720 LOD0; 2220 LOD1
textures: 0.33 MB

Author: Madeline Usher

Bulk-Granular/Liquids Unloading Facility
• $screenshot_240-180$.jpg 12.38KB
• ac.texture.txt 25 bytes
• ac.tga 192.53KB
• concrete.texture.txt 31 bytes
• concrete.tga 24.53KB
• config.txt 6.01KB
• duct.texture.txt 27 bytes
• duct.tga 12.53KB
• hose.texture.txt 27 bytes
• hose.tga 1.28KB
• rust.texture.txt 27 bytes
• rust.tga 12.53KB
• unloader-low.im 108.25KB
• unloader.im 184.24KB
• unloader.lm.txt 246 bytes
• white-metal.texture.txt 34 bytes
• white-metal.tga 12.53KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE109: The low-detail meshes total more than 500 polygons. This may have a negative impact on performance: 0: 3720, 1: 2220