Automatic coupler w/brake hose, back (dark)

Automatic coupler w/brake hose, back (dark)

This is just a re-coloring of Charlie Lear's (CJLear) kuid:62941:50002 -- a relatively low-poly automatic coupler with brake hose, installed as a bogey.

Limfront/limback should be 0.45 to 0.60m from the face of the buffer beam. Bogey attachment point is {0, limback - 1.5m, 0}. Coupler pocket bottom 0.84m, top 0.89m, width 0.35m. If no coupler pocket, use black rectangle on buffer beam texture instead.

[polygons: 210; textures: 0.003 MB]

Author: Madeline Usher

Automatic coupler w/brake hose, back (dark)
• cjlcoupler.texture.txt 33 bytes
• cjlcoupler.tga 3.53KB
• config.txt 6.30KB
• reskin.gs 1.23KB
• thumbnail.jpg 22.96KB