MRBK Wood Trestle End 02

MRBK Wood Trestle End 02

Moffat Road Bridge Kit

End section for MRBK wooden trestles

Attach one of these to each end of a 'MRBK Wood Trestle 02' or similar to complete the frames.
Attaching two of these together end-to-end results in a complete 4-span (64ft) bridge.

This is a 'Rails' track asset, so it can be curved and straightened like regular track.
Spline points should be adjusted so the ties are square when viewed from the side.
This mesh should add only 2 supports and complete a third support at each end of the bridge.

Running Rail Weight: 80#
Mesh Length: 32ft (9.753m)

Poly Count (per gmax): 1210

Wood texture is modified from 'd81' from 3Dviewport.com.

Suggestions for improvement are welcome!

Author: Eric Jacobsen

MRBK Wood Trestle End 02
• config.txt 3.12KB
• license.txt 719 bytes
• mrbk_wood_trestle_end_02.im 86.96KB
• rail2.texture.txt 28 bytes
• rail2.tga 4.04KB
• woodtrestletexture2.texture.txt 42 bytes
• woodtrestletexture2.tga 768.04KB
• woodtrestletrack2.texture.txt 40 bytes
• woodtrestletrack2.tga 384.04KB

VE45: The tag '#length' is not permitted within a container of type 'obsolete-track'.
VE45: The tag '##' is not permitted within a container of type 'obsolete-track'.

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE61: Required tag 'width' was missing and has been set to default.
VE62: Required container 'thumbnails' is missing.