AF cbridge left

AF cbridge left

Connecting bridges are needed to connect bucket chain excavators with the overburden conveyor bridge to a working unit. The bucket chains are continuously producing excavated spoil, which is lead through chutes in the centre of the upperworks to the lower end of a conveyor belt in the connecting bridge. This conveyor belt transports spoil to the conveyor bridge. At the overburden conveyor bridge spoil from two or even three connecting bridges is transferred by other chutes to the main conveyor belt. Spoil from all excavators is transported over a distance of 270 m across the lignite mine to the mined out side. There it is distributed to different conveyor belts which deposit it at the dump site.

Author: K. Bernhard, U. Nagel, E. Schueler

AF cbridge left
• $screenshot$.jpg 16.49KB
• config.txt 3.40KB
v_bruecke_links
afb_dach.texture.txt 31 bytes
afb_dach.tga 192.04KB
afb_grau.texture.txt 31 bytes
afb_grau.tga 812 bytes
afb_grau_d.texture.txt 33 bytes
afb_grau_d.tga 812 bytes
afb_querverband.bmp 48.05KB
afb_querverband.texture.txt 65 bytes
afb_querverband.tga 48.04KB
afb_wand.texture.txt 31 bytes
afb_wand.tga 384.04KB
drehgestell
drehgestell.texture.txt 34 bytes
drehgestell.tga 192.04KB
drehgestell_einfach.im 34.14KB
rad.texture.txt 26 bytes
rad.tga 192.04KB
foerderband.texture.txt 34 bytes
foerderband.tga 48.04KB
gelaender_rot.texture.txt 36 bytes
gelaender_rot.tga 812 bytes
rad.texture.txt 26 bytes
rad.tga 192.04KB
v_bruecke_links.im 262.73KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE39: The texture 'v_bruecke_links/afb_grau.tga' is a uniform color.
VE39: The texture 'v_bruecke_links/afb_grau_d.tga' is a uniform color.
VE39: The texture 'v_bruecke_links/gelaender_rot.tga' is a uniform color.
VE109: The low-detail meshes total more than 500 polygons. This may have a negative impact on performance: 0: 5392