VR Type 'E' Signalbox - Cressy

VR Type 'E' Signalbox - Cressy

This is a faithful replica of the VR 'E' type wooden signalbox, that once watched proudly over and controlled the movement of trains through and around the Victorian country station at Cressy (it, sadly, no longer exists). Controlling as it did, a four way junction, a substantial 6 track yard with four additional interlocked sidings and a loco depot (provided with full servicing facilities, including a three stall roundhouse), this required a large 88 lever frame that has been modelled as accurately as possible in the interior of the signalbox. Unlike the other Type 'E' Generic Signalboxes previously released by this author, this version is not supported on an open frame and is intended solely to be mounted on a platform. If used to represent the signalbox at Cressy, then it should be placed between the two main station buildings on the Platform of the station (available separately from the same author <kuid2:1854:31154:1>). Otherwise, as a 'generic' Type 'E' box and KIND 'scenery' item, it can be placed anywhere on a route without the need for additional Invisible Track (although somewhere in the vicinity of a substantial interlocked junction and on a platform would be appropriate). It also has the capabililty of being used as the 'housing' for a Trainz Surveyor camera (for which the 'tracking' type is recommended) so that one might view the passage of trains, as if located within the signalbox, Toward this end, it has a complete interior as part of the mesh. Because of this, there are no 'interior' views nor any associated 'external' views. It is intended for use in Trainz version TS2009 or above.

Author: Jerker

VR Type 'E' Signalbox - Cressy
• $screenshot$.jpg 48.14KB
• black.texture.txt 28 bytes
• black.tga 193.04KB
• chrome.texture.txt 29 bytes
• chrome.tga 193.04KB
• chromic.texture.txt 30 bytes
• chromic.tga 193.04KB
• concrete_cast-in-place_flat_grey-normals.texture.txt 88 bytes
• concrete_cast-in-place_flat_grey-normals.tga 769.04KB
• concrete_cast-in-place_flat_grey.texture.txt 55 bytes
• concrete_cast-in-place_flat_grey.tga 769.04KB
• config.txt 3.05KB
• cressy_pull_diagram.texture.txt 42 bytes
• cressy_pull_diagram.tga 6.00MB
• desk lamp-normals.texture.txt 65 bytes
• desk lamp-normals.tga 193.04KB
• desk lamp.texture.txt 32 bytes
• desk lamp.tga 193.04KB
• env_metal.bmp 192.05KB
• env_metal.texture.txt 32 bytes
• oakqrtrt.texture.txt 31 bytes
• oakqrtrt.tga 192.04KB
• red.texture.txt 26 bytes
• red.tga 193.04KB
• signal-box-8-normals.texture.txt 68 bytes
• signal-box-8-normals.tga 12.00MB
• signal-box-8.texture.txt 35 bytes
• signal-box-8.tga 12.00MB
• signalbox.im 1.78MB
• tr_book_page.texture.txt 35 bytes
• tr_book_page.tga 385.04KB
• tr_book_spine.texture.txt 36 bytes
• tr_book_spine.tga 25.04KB
• white.texture.txt 28 bytes
• white.tga 192.04KB
• window-window2alpha.texture.txt 53 bytes
• window.tga 48.04KB
• window2alpha.bmp 48.05KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE216: Material fridge.m.tbumpenv in mesh file signalbox.im has an inappropriate texture slot assigned: texReflect
VE217: Material fridge.m.tbumpenv in mesh file signalbox.im has no texture assigned to a required slot: texBump
VE39: The texture 'black.tga' is a uniform color.
VE39: The texture 'white.tga' is a uniform color.
VE107: The high-detail meshes total more than 10000 polygons. This may have a negative impact on performance: 0: 21959
VE109: The low-detail meshes total more than 500 polygons. This may have a negative impact on performance: 0: 21959