VR New R T1 Grn - 1889-1895

VR New R T1 Grn - 1889-1895

Victorian Railways R Class 0-6-0 Light Lines Locomotives comprised a group of 25 engines destined for branchline goods traffic. The class were built by Robinson's Bros South Melbourne and given road numbers and where, in odd notation, 447 to 495 (builder's no. 9 - 33) and where called 'Kitson's Design' to distinguish them from the Beyer Peacock Design which later became 'Old' R Class. In 1893 the class was re-looked at from it's design and the activities of the class became restricted to mainline goods traffic as the high axle loading of 13tons and 17cwt precluded their use on the light lines which they were intended for. These locomotives were fitted with two inside cylinders, 17in x 26in, the slide valves being actuated by Stephenson's valve gear. Each of the six coupled driving wheels measured 4ft 6in, the boiler had a total heating surface of 1054.00 sq ft, of which the tubes contributed 971.00 sq ft. The firebox of 83.00 sq ft had a fire grate area of 17.8 sq ft. The working boiler pressure was 140lbs, which gave a tractive effort of 15,585lbs, with the axles oddly spaced at 7ft 8in and 6ft 9in. Cast-iron sandboxes were mounted on the running plates adjacent to the smokebox and incorporated the leading splashers.

The 'New' R class was built to be a Light Lines Goods Engine which looks the same as the main Line goods Engine Y Class but was 10 inches shorter and the wheels spaced oddly being 7ft 8in and 6ft 9in. The 6 wheel tender which was standard on the 'New A', 'Y' and 'D' classes carried 10,001 litres of water and 3.556 tons of coal.

In 1890 they were allocated as follows: Stawell (7), Melbourne (6), Bendigo (5), Ballarat (3), Benalla (2), Princess Bridge (1) and Sale (1).

Some of the class where also involved in accidents, 463 and 467 had a collision at Baddaginnie 1894, 463 was damaged at Dooen 1894, 477 ran into a goods train at Lara 1906, 459 collided with a DDE on a showgounds special in 1912, 485 derailed and struck the platform at Canterbury 1923.

This model represents the as built with 'original' Lamp Holder, screwlink couplers and air hose on the left side with Simple 2 Tone Green paint.

This model has prototypical running numbers via the VTSS 'Victrainz Script System' and set Train Lamps to prototype lamp modes.

Locomotive Data:

Load Table: 90%
Mass: (empty) 34-11-0-0 (loaded) 37-19-0-0
Coupled Mass: (empty) 49-7-0-0 (loaded) 64-8-0-0
Axle Load: 13-17-0-0
Max Speed: 40mph (Tender First) 28mph
Wheel Base: 14ft 5in (total) 35ft 0in
Minimal Weight Rail: 60lbs/y

VR New R T1 Grn - 1889-1895
• blower.tfx 404 bytes
• blower.wav 278.82KB
• compressor-chuff-1.wav 60.04KB
• compressor-chuff-2.wav 60.04KB
• icon.tga 6.04KB
loco_body
body_highest.im 1.49MB
body_low.im 319.92KB
body_lowest.im 46.21KB
body_mid.im 1.19MB
compressor.im 1.47KB
compressor.kin 5.95KB
groundplane-groundplane.texture.txt 59 bytes
groundplane.tga 128.53KB
main-env.tga 12.00MB
main-main-env.texture.txt 49 bytes
main-normals.texture.txt 83 bytes
main-normals.tga 12.00MB
main-spec.tga 12.00MB
main.tga 12.00MB
night-lamps.im 772 bytes
numbers.texture.txt 32 bytes
numbers.tga 768.04KB
rclass.lm.txt 282 bytes
windows.texture.txt 51 bytes
windows.tga 1.00MB
• r_class.gs 39.43KB
• safetyvalves-large.tfx 420 bytes
• safetyvalves-small.tfx 420 bytes
• screenshot.jpg 28.97KB
shadow
shadow.im 82.92KB
• small-gland.tfx 404 bytes
• snifter-valves-big.tfx 404 bytes
• snifter-valves.tfx 404 bytes
• whistle.tfx 428 bytes