VR Timber Bridge 15'-300ft

VR Timber Bridge 15'-300ft

VR Bridge Kit - 300ft bridge - 15ft spans
From the beginning of the Victorian Railways, many bridges were built to a timber trestle bridge design of one form or another, along with many brick and steel bridges on mainlines. By the 1890s, the Victorian Railways had essentially standardized their bridge design, with minor changes occurring to handle heavier traffic.

This asset represents the standard 300ft bridge with 15ft spans. The embankment is designed to be used with the VR 'embankment' tracks, and an optional 'ballast cap' object is included to fill the ballast around the VR bridge tracks.

This bridge kit represents the 15ft span and 20ft span bridges, including 15ft span with shunters gangways, along with a set of 6ft, 13ft, 23ft, 32ft, and 45ft piers of both 'type a' and 'type b' variants and a safety bracket. They are designed for use with the VR Bridge tracks, which form a correct height ballast fill in the deck, as per Victorian Railways standard. The kit also includes a range of 'fixed' bridge objects of various lengths for both the 15ft deck and 20ft deck, using the 'mesh-asset' tag and 'position' tag to configure the length of the bridge.

This kit is based on the kit by Jerker, with changes to better fit the VR plans that were not possible at the time of the earlier kit.

Author: S301

VR Timber Bridge 15'-300ft
• $screenshot$.jpg 46.11KB
• bridge.gs 1.30KB
• config.txt 5.48KB