Coal Loading Dummy

Coal Loading Dummy

This is a 10 ft long section of spline track which will make a non-industry-interactive coal mine
fill an industry-interactive coal or hopper car. It consists of a 0.1 inch by 0.1 inch by 0.1 inch glass textured cube
(which you will not be able to see) and the appropriate attachment and trigger points for industry interactivity (with
sound and smoke effects). Since many coal mines have multiple coal hoppers and/or delivery chutes on parallel tracks,
the trigger radius is only 5 ft. Place the center point of the 4 rotating yellow circles under the center of the hopper or
end of the chute. This was tested using built-in asset Coalmine Wheeling Steel (3 tracks). The track will change to whatever
type is attached to it so it will work in any gauge. The cross track is actually a dummy road spline so track will not
attach to it. This will work with a string of cars on the same track but it is very dependent on the cars trigger radius
(some will/some won't).

Note!!! you will not be able to see where this item is in Driver so either make certain you remember where you put it
or place a sign (unload here perhaps) off to the side at the center point of the 10 ft section of track.

Author: Benjamin R. Dorsey

Coal Loading Dummy
• brightred.bmp 12.05KB
• brightred.texture.txt 32 bytes
• coal_dump.wav 104.12KB
• coal_loading_dummy.im 1.67KB
• coaltower.gs 3.48KB
• config.txt 5.49KB