Chama Roundhouse

Chama Roundhouse

This is the roundhouse on the D&RGW narrow gauge located at Chama, New Mexico
and was based on a John W. Maxwell plan dated 10/01/1899. This represents it after the original 50 ft
turntable was replaced with a 65 ft turntable. The dirt surrounding the turntable pit is MAN6_dirt_2
(kuid:63290:21111). There are 2 invisible tracks (track-3 and track-13) outside the roundhouse walls
which can be ignored if not wanted or utilized by changing the kuid in the sections of the attached-track
list to either rail-only track or MAN6 Narrow Gauge Track. If not wanted, the turntable can be prevented
from stopping at the invisible tracks by:
1. Deleting the values 40 and 220 for track 13 from the angle entry in the config file.
2. Deleting the values 240 and 320 for track 3 from the angle entry in the config file.
They can be put back if you change your mind.

Author: Benjamin R. Dorsey

Chama Roundhouse
• config.txt 7.03KB
pit
asphalt4.jpg 92.07KB
asphalt4.texture.txt 31 bytes
black.bmp 3.05KB
black.texture.txt 28 bytes
brick10.jpg 50.11KB
brick10.texture.txt 30 bytes
concrete6.jpg 33.12KB
concrete6.texture.txt 32 bytes
man dirt2.texture.txt 32 bytes
man dirt2.tga 48.53KB
metal14.jpg 14.50KB
metal14.texture.txt 30 bytes
metal6.jpg 47.37KB
metal6.texture.txt 29 bytes
pit.im 2.37MB
wall_29.jpg 41.26KB
wall_29.texture.txt 30 bytes
wood2.jpg 23.21KB
wood2.texture.txt 28 bytes
wood35.jpg 27.38KB
wood35.texture.txt 29 bytes
wood5.jpg 9.34KB
wood5.texture.txt 28 bytes
spinner
black.bmp 3.05KB
black.texture.txt 28 bytes
spinner.im 194.31KB
wood2.jpg 23.21KB
wood2.texture.txt 28 bytes