Auto Swing Bridge 2

Auto Swing Bridge 2

This is an interactive 2-lane automotive swing bridge, Clearence is approximately 375 feet
on each side in the open position. This is is designed to be triggered to open the span and stop automotive traffic when
some form of water traffic which has been set up as a locomotive comes within the trigger radius on the 4 invisible
tracks in the water. This takes 600 keyframes (approximately 20 seconds) to close so don't drive too fast. The bridge
operators shack is built-in.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The green invisible tracks are at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.

Author: Benjamin R. Dorsey

Auto Swing Bridge 2
• anim.kin 75.33KB
• bascule.im 1.30MB
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• brightred.bmp 12.05KB
• brightred.texture.txt 32 bytes
• concrete 13.jpg 24.66KB
• concrete 13.texture.txt 34 bytes
• concrete3.jpg 52.57KB
• concrete3.texture.txt 32 bytes
• concrete6.jpg 33.12KB
• concrete6.texture.txt 32 bytes
• config.txt 4.61KB
• door1.jpg 23.51KB
• door1.texture.txt 28 bytes
• metal 36.bmp 192.05KB
• metal 36.texture.txt 31 bytes
• sg_timber42c-128.bmp 48.05KB
• sg_timber42c-128.texture.txt 39 bytes
• shingle1.jpg 55.21KB
• shingle1.texture.txt 31 bytes
• wall10.jpg 68.85KB
• wall10.texture.txt 29 bytes
• window9.bmp 96.05KB
• window9.texture.txt 30 bytes
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes