Rail Boat Bridge 1

Rail Boat Bridge 1

This is an interactive swing bridge for boats and trains. This takes 600 keyframes
(approximately 20 seconds) to close so don't drive too fast. The bridge operators shack is built-in.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The green invisible tracks are at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.

NOTE!!! This is offered as an experiment for downloaders to make completely interactive. You will have to add
visible and invisible tracks to cross the span then place triggers, signals, etc plus do some rule setting. Once someone
gets it working correctly I would appreciate it they would write a short README file listing the steps necessary and sending it to me
so I can include it in an updated version of this bridge and with several others I've yet to make. Thanks.

Author: Benjamin R. Dorsey

Rail Boat Bridge 1
• anim.kin 42.40KB
• bascule.im 1.28MB
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• concrete3.jpg 52.57KB
• concrete3.texture.txt 32 bytes
• config.txt 3.80KB
• door1.jpg 23.51KB
• door1.texture.txt 28 bytes
• rail.texture.txt 27 bytes
• rail.tga 6.04KB
• railroad_ties-railroad_ties.texture.txt 61 bytes
• railroad_ties.bmp 96.05KB
• railroad_ties.tga 97.04KB
• sg_timber42c-128.bmp 48.05KB
• sg_timber42c-128.texture.txt 39 bytes
• shingle1.jpg 55.21KB
• shingle1.texture.txt 31 bytes
• wall10.jpg 68.85KB
• wall10.texture.txt 29 bytes
• window9.bmp 96.05KB
• window9.texture.txt 30 bytes
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.