Tocumwal Bridge 2

Tocumwal Bridge 2

This is version 2 of the Tocumwal Bridge over the Murray River linking Victoria and
New South Wales in Austrailia. This version is interactive to open the bridge and stop automotive traffic at the
approach of a boat that has been setup as a locomotive riding on the invisible tracks in the water.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The green invisible tracks are at -10 meters (-32 ft 9.0 in).
Water level should be set at -3 meters (-9 ft 10.0 in).
Many thanks to Craig Carr and Noel Brettoner for the many pics and info.
NOTE!!! It is possible to set this up in Surveyor to also control rail traffic across the bridge. See the README file
in the folder for instructions.

Author: Benjamin R. Dorsey

Tocumwal Bridge 2
• anim.kin 19.70KB
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• brass.bmp 822 bytes
• brass.texture.txt 28 bytes
• concrete3.jpg 52.57KB
• concrete3.texture.txt 32 bytes
• concrete6.jpg 33.12KB
• concrete6.texture.txt 32 bytes
• config.txt 4.14KB
• metal5.jpg 18.84KB
• metal5.texture.txt 29 bytes
• part_1.im 56.00KB
• part_2.im 1,000.75KB
• part_3.im 920.50KB
• part_4.im 1.11MB
• part_5.im 1.11MB
• readme.txt 1.83KB
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.