Selby Swing Bridge 5

Selby Swing Bridge 5

This is an automotive version (by request) of the interactive offset swing bridge over the Ouse
River about 12 miles south of York with different textures. This is is designed to be triggered to open the span and stop
automotive traffic when some form of water traffic which has been set up as a locomotive comes within the trigger radius
on the 2 invisible tracks in the water. This takes 450 keyframes (approximately 15 seconds) to open so don't drive too fast.
Many thanks to ECML Stuart for the pics and info.
The blue invisible track is at ground level (z axis = 0 ft 0.0 in).
The green invisible track is at z axis = -10 meters (-32 ft 9.0 in) below ground level.
Water level should be set at -3 meters (-9 ft 10 in) below ground level.

Author: Benjamin R. Dorsey

Selby Swing Bridge 5
• anim.kin 31.85KB
• asphalt 5.jpg 23.97KB
• asphalt 5.texture.txt 32 bytes
• bascule.im 1.28MB
• concrete10.jpg 1.83KB
• concrete10.texture.txt 33 bytes
• config.txt 3.71KB
• darkgrey.bmp 3.05KB
• darkgrey.texture.txt 31 bytes
• metal5.jpg 18.84KB
• metal5.texture.txt 29 bytes
• navygrey.bmp 12.05KB
• navygrey.texture.txt 31 bytes
• wall_29.jpg 41.26KB
• wall_29.texture.txt 30 bytes
• wood17.jpg 218.85KB
• wood17.texture.txt 29 bytes
• wood2.texture.txt 28 bytes
• wood2.tga 49.04KB