Tocumwal Bridge 3

Tocumwal Bridge 3

This is version 3 (with updated textures and an extra invisible track in the water)
of the Tocumwal Bridge over the Murray River linking Victoria and New South Wales in Australia. This version is
interactive to open the bridge and stop automotive traffic at the approach of a boat that has been setup as a
locomotive riding on the invisible tracks in the water.
The blue invisible tracks are at ground level (z axis = 0 ft 0.0 in).
The red invisible track is at -3 meters (-9 ft 10.0 in).
The green invisible tracks are at -10 meters (-32 ft 9.0 in).
Many thanks to Craig Carr and Noel Brettoner for the many pics and info.
NOTE!!! It is possible to set this up in Surveyor to also control rail traffic across the bridge. See the README file
in the folder for instructions.

Author: Benjamin R. Dorsey

Tocumwal Bridge 3
• anim.kin 19.70KB
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• brass 2.bmp 822 bytes
• brass 2.texture.txt 30 bytes
• concrete3.jpg 52.57KB
• concrete3.texture.txt 32 bytes
• concrete6.jpg 33.12KB
• concrete6.texture.txt 32 bytes
• config.txt 4.52KB
• metal5.jpg 18.84KB
• metal5.texture.txt 29 bytes
• part_1.im 56.13KB
• part_2.im 1,000.75KB
• part_3.im 920.50KB
• part_4.im 1.11MB
• part_5.im 1.11MB
• readme.txt 1.83KB
• support.bmp 822 bytes
• support.texture.txt 30 bytes
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes

This item is offered free of charge for your enjoyment. It may not be sold or used in any commercial venture. It may be re-skinned for your personal use.