Large Silver Mill

Large Silver Mill

This is a large mill to process silver ore. This is all 3 ft gauge but the lower tracks will change to whatever style and guage is attached to them.
This is industry interactive (including AI) to unload a car on top and load a car on the inner lower track. The outer lower track is not interactive. The end-of-track
bulkhead on the right end of the trestle can be deleted to make the trestle accessible from both ends by deleting the Part 3 section of the config files mesh table.
It can be put back by re-entering the code as long as you do not delete the part 3 image file. The load a car trigger is in the center of the lower section. The
unload a car trigger is in the center of the long open sided bin on the left.

Author: Benjamin R. Dorsey

Large Silver Mill
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• board - batten.jpg 18.37KB
• board - batten.texture.txt 37 bytes
• concrete6.jpg 33.12KB
• concrete6.texture.txt 32 bytes
• config.txt 5.75KB
• darkwood-floor.jpg 13.77KB
• darkwood-floor.texture.txt 37 bytes
• door8.jpg 12.71KB
• door8.texture.txt 28 bytes
• iconlsm.tga 17.04KB
• man dirt2.texture.txt 32 bytes
• man dirt2.tga 48.53KB
• metal14.jpg 14.50KB
• metal14.texture.txt 30 bytes
• part_1.im 1.18MB
• part_2.im 724.05KB
• part_3.im 5.12KB
• shingle1.jpg 55.21KB
• shingle1.texture.txt 31 bytes
• silver_dump.wav 104.12KB
• silvertower.gs 3.67KB
• vent1.jpg 4.40KB
• vent1.texture.txt 28 bytes
• window9.bmp 96.05KB
• window9.texture.txt 30 bytes
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes