Two_Harbors_Ore_Dock

Two_Harbors_Ore_Dock

This is based on one of two docks at Two Harbors, Minnesota. You must add four
switches in surveyor using rail only track. This is a bit tricky but can be done.
Two go where the 2-track approach trestle makes the transition to the 4-track bin
section. When looking from shore towards the far end the other two form a single
crossover from the left track to right track on the 2-track approach trestle. A
double crossover is possible though not prototypical.
This is interactive to unload hoppers with iron ore (kuid2:30671:9260111:2) on top.
It is not interactive to load ore ships at the bottom.
This uses kuid2:36713:40100:2 for the lamp posts.

VERY IMPORTANT! This is a large and extreamly high poly count item.

Author: Benjamin R. Dorsey

Two_Harbors_Ore_Dock
• coal_load.wav 104.12KB
• concrete19.jpg 295.50KB
• concrete19.texture.txt 33 bytes
• config.txt 17.35KB
• d&rgw_planks.jpg 7.96KB
• d&rgw_planks.texture.txt 35 bytes
• metal5.jpg 18.84KB
• metal5.texture.txt 29 bytes
• metal6.jpg 47.37KB
• metal6.texture.txt 29 bytes
• oredump.gs 6.90KB
• part_1.im 683.03KB
• part_10.im 1.22MB
• part_11.im 1.21MB
• part_12.im 1.22MB
• part_13.im 1.22MB
• part_14.im 1.22MB
• part_15.im 1.22MB
• part_16.im 1.22MB
• part_17.im 1.22MB
• part_18.im 1.22MB
• part_19.im 1.22MB
• part_2.im 2.26MB
• part_20.im 1.22MB
• part_21.im 1.22MB
• part_22.im 1.22MB
• part_23.im 1.22MB
• part_24.im 1.22MB
• part_25.im 1.22MB
• part_26.im 1.22MB
• part_27.im 1.22MB
• part_28.im 1.22MB
• part_29.im 1.22MB
• part_3.im 591.08KB
• part_30.im 1.22MB
• part_31.im 1.22MB
• part_32.im 1.22MB
• part_33.im 1.22MB
• part_34.im 650.04KB
• part_35.im 796.71KB
• part_4.im 578.36KB
• part_5.im 626.64KB
• part_6.im 578.36KB
• part_7.im 653.54KB
• part_8.im 1.07MB
• part_9.im 1.25MB
• rusty iron 3.texture.txt 35 bytes
• rusty iron 3.tga 65.04KB
• two harbors ore dock.jpg 10.86KB
• wood2.jpg 23.21KB
• wood2.texture.txt 28 bytes
• yvrr hopper texture plain.bmp 12.05KB
• yvrr hopper texture plain.texture.txt 48 bytes