Hicapyflat 1 body

Hicapyflat 1 body

Some flatcar loads while relativly small were be so heavy they exceded the axle loading limit for a standard (2 bogie) flatcar.
Several Railroads modified flatcars by replacing the normal 2 bogies with two bolsters with bogies at each end which then attached to the
underside of the car body in the same manner as the original single bogie. This reduces the axle loading by almost half. This is the body section
with no load. Assemble this car in Surveyor by placing the body section on the track then select the bolster (kuid2:210518:6501:1) and place them
half way between the center of the body and each end.

Author: Benjamin R. Dorsey

Hicapyflat 1 body
• black.bmp 3.05KB
• black.texture.txt 28 bytes
• config.txt 2.70KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• hicapyflat_1_body.im 89.45KB
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes
• wood2.jpg 121.70KB
• wood2.texture.txt 28 bytes