Hicapyflat 11 Body

Hicapyflat 11 Body

This unusual four 6-wheel bogey depressed center flatcar is based on what I remember of a set of plans in
an old issue of Model Railroader Magazine (1960 to 1964). Cars like this were usually owned by a company rather then a
railroad. The depressed center allowed taller loads and the multi-bogeys allowed very heavy loads to be moved by reducing the
axle loading. This is the body section with no load. There is an attachment point (a.load0) in the center of the car. The letterings
text, color, and size can be changed by manipulating the values in the effects section of the config file mesh table.
To assemble this car in Surveyor:
1. Place Hicapyflat_11_Body on the track.
2. Plate two Hicapyflat_2x6w_bolsters (kuid:1:210518:6515:1) on the track but not under the body.
3. Rotate one bolster 180 degrees to get the coupler facing outward.
4. Move the bolster assemblies under the body.
When properly positioned there will be only 1 greeen and 1 red arrow and the assembled car will move as a unit.

Hicapyflat 11 Body
• config.txt 3.99KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• hicapyflat_11_body.im 472.43KB
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes