Hicapyflat 11 Body

Hicapyflat 11 Body

Revised to be interactive. There is an attachment point (a.load0) in the center of the car.
The letterings text, color, and size can be changed by manipulating the values in the effects section of the
config file mesh table.
To assemble this car in Surveyor work from the center outward:
1. Place Hicapyflat_11_Body on the track.
2. Place two Hicapyflat_2x6w_bolsters (kuid:1:210518:6515:1) on the track but not under the body.
3. Rotate one bolster 180 degrees to get the coupler facing outward.
4. Move the bolster assemblies under the body.
When properly positioned there will be only 1 greeen and 1 red arrow and the assembled car will move as a unit.

Author: Benjamin R. Dorsey

Hicapyflat 11 Body
• config.txt 3.93KB
• dark grey.bmp 12.05KB
• dark grey.texture.txt 32 bytes
• hicapyflat_11_body.im 472.43KB
• light grey.bmp 822 bytes
• light grey.texture.txt 33 bytes