NSWGR S Truck Mixed

NSWGR S Truck Mixed

NSWGR S Truck
The S truck was the most common goods wagon found on the NSWGR for over 50 years. The design first appeared in November 1906, with the wagons undergoing many variations in service. Steel floors were fitted, but replaced with timber due to corrosion problems. Wooden sides were replaced with steel sides, underframes rebuilt, automatic couplers replaced the 3 link variety and so on. A complete rebuild by the Clyde Wagon Works was carried out in the 1940's - 1950's, with the number of bodies on the Shop Order sitting at 10,000 in March 1950.

This model is based on the S wagon design circa 1953, where the body was fitted without buffers and with grade control equipment. It is depicted with a load of coal, a typical job for the little wagon in loco depots across the state.

Author: David Taylor

NSWGR S Truck Mixed
• coal_dump1.wav 119.12KB
• coal_load1.wav 104.12KB
• config.txt 11.11KB
nswgr_struck_mixed_art
nswgr_struck_mixed_art_512.texture.txt 101 bytes
nswgr_struck_mixed_art_512.tga 1.00MB
nswgr_struck_mixed_art_icon.texture.txt 103 bytes
nswgr_struck_mixed_art_icon.tga 32.53KB
nswgr_struck_mixed_body
load
coal_map.texture.txt 31 bytes
coal_map.tga 48.53KB
load.kin 8.59KB
load.pm 4.41KB
nswgr_struck_mixed_body.im 56.23KB
nswgr_struck_mixed_body.lm.txt 153 bytes
struck.texture.txt 29 bytes
struck.tga 192.53KB
nswgr_struck_mixed_shadow
black.texture.txt 28 bytes
black.tga 812 bytes
nswgr_struck_mixed_shadow.pm 27.65KB
• small_load.tga 3.53KB
• small_unload.tga 3.53KB
• struckmixed.gse 3.73KB