ARTC NSW - VR North-East - Base Session

ARTC NSW - VR North-East - Base Session

For T:ANE SP3 (trainz-build 4.5).

This is a base session of the New South Wales and Victorian Railways North-East route based in the mid 1980's of actual trains and consists with a few generic for people wanting a session that has stock placed over it ready to drive.


Consist List

T 380 Automobile - This is a Sydney bound train from Melbourne which lost a T Class at Seymour, once at Albury you take the locomotive off and change it for two 422's and continue towards sydney. (Full route several hours)

T 413 - This is a Melbourne-Cudgeewa passenger, take the locomotive and couple to the passenger train at Wodonga, move it to the platform and load passengers then take it towards Melbourne stopping all stations. (Half route couple of hours)

Y 119 - Use this locomotive to assemble the Broad Gauge steel slab train at Albury, you need to move 5 wagons at a time to fit in the shunt and place them on one of the two tracks next to the Standard Gauge Passenger Platform. (about 1 hour)

B 75 and X 54 - After assembling the steel slab train it is ready for it's trip to Long Island, couple the two locomotives at Wodonga then head for Albury to pick up the train and head for Melbourne. (half route a couple of hours)

A 77 - This is a Albury-Melbourne passenger only stopping at Wodonga, Wangaratta, Benalla, Violet Town, Euora, Mangalore, Seymour. (half route a couple of hours)

T 402 - This is a Cobram-Melbourne passenger stopping at Mangalore, Seymour. (about 10 minutes)

T 331 - Empty grain bound for Wagaratta. (about 1 hour)

48159 - This is the Ettomagah shunter, assemble the consist and take it to Albury then assemble a consist bound for Melbourne, can use any locomotive such as G 511, C 503 or any of the 81 class, if the consist is over 1000 tonnes use two locomotives. (about two hours)

48107 - Use this locomotive to shunt the empty Standard Gauge steel slab train to make room for the next steel train, also make a consist out of any of the Standard Gauge rollingstock bound for Sydney. (about 1 to 2 hours)

4464, 8146 and 8118 - Use these locomotives for the Sydney bound goods train you have just assembled. (half route a couple of hours)

44231 and 4425 - This is a Albury bound steel slab train. (half route a couple of hours)

42251 - This is a Sydney-Melbourne passenger stopping at Wagga Wagga, Albury, Wangaratta, Benalla, Violet Town, Euora, Seymour. (Full route several hours)

4863 - This is a Wodonga-Albury transfer goods, this stock can be used to form a Sydney bound goods. (about 20 minutes)


Rest of the trains can be free lance driving them where you want.

ARTC NSW - VR North-East - Base Session