SAR 700 Class E-spec - 1

SAR 700 Class E-spec - 1

Physic for the South Australian Railways 700 Class Steam Locomotive built 1926, when stantionary use the blower to keep the pressure up, nominal pressure is 160 for 80% and 170 for 85% Boiler Pressure, cut-off range is 75 to 25%.

This physic could be used for medium size Mikado locomotives such as USA or other Countries that are similar in power, mainly suited for 4ft9in dia driving wheels, smaller wheels increase tractive effort, larger wheels decrease tractive effort (this is controlled with the bogie anim-dist and not with the cylinder volumes), this physic will take 600 tonnes to 45-50mph on 1in100 or less and 600 tonnes to 12-20 mph on a 1in45 or less.

Notes: Brake pressures are setup for Australian pressure specs, this should be cloned and pressures set to your needs.

Boiler Type: Superheated
Boiler Tubes: Unknown at 2 inches diameter
Boiler Flues: Unknown at 5 inches diameter
Boiler Volume: 11,519 Litres
Max Firebox Temp: 1849 Fah
Firebox: 195.00 sq ft
Tubes: 2,400.00 sq ft
Elements: 619.00 sq ft
Grate Area 47.00 sq ft
Boiler Press: 200 PSI
Safety Valve Low: 202.6 PSI
Safety Valve High: 205.2 PSI
Bore x Stroke: 22in x 28in
Driving Wheels: 4ft 9in
Tractive Power: 40,400lbs @ 85% Boiler Pressure
Top Speed: 50mph
Main Res: 100 PSI Max
Brake Pipe: 72 PSI Max
Brake Cylinder: 50 PSI Max

Author: Azervich

SAR 700 Class E-spec - 1
• data.txt 1.93KB
• screenshot.jpg 37.57KB