Telegraph 16wire

Telegraph 16wire

UK type 4-6 spar 16-24 wire divider and different initiator/terminator telegraph pole splines.
These replace the previous UTC telegraph pole sets, and are TRS2004 compatable. A few improvements
now include better wood textures, pole steps, and additional guy cables, and are very accurate in
dimensions. In reality the height varied, these ones are default 8.5 metres high (approx 28ft), but you can
adjust the height by about 1 metre up or down. The wires were kept very taut with little or no sagging. The
insulators were made of porcelain, none were made of glass as used in the US, Canada, et. These
telegraph poles were used for signal and points relay switching, communications, and higher voltage lines,
between signal boxes, relay stations and sub-relay boxes. Telegraph poles of various configuations were
a common sight beside the railway trackside right up untill the late 1960s. They then quickly dissapeared,
and were replaced by pvc insulated ground layed cables. After installing, go into Trainz Surveyor, Objects
Panel/Splines under Britain, Telegraph Poles. The rotating 3d thumbnail does not show them up too well (as
wires only). They can be placed ANYWHERE on your layout, not just by the side of the track. After
placing by the track and IF they do not appear, just place a little outside the vicinity of the track they WILL then appear and just move them back again. These models and textures were created with Discreet's GMAX and Paint Shop Pro programs. All models tested on an Athlon 2400XP, with ATI Radeon with latest drivers, WinXP, and TRS2004, date January 2004.

Author: Rick George (Eurostar)

Telegraph 16wire
• $screenshot$.jpg 10.11KB
• 4wire30m-4wire30m_a.texture.txt 53 bytes
• 4wire30m.jpg 6.86KB
• 4wire30m_a.bmp 65.05KB
• config.txt 9.09KB
• dls_thumbnail.jpg 8.92KB
tel_16d
steps08-steps08.texture.txt 49 bytes
steps08.bmp 33.05KB
steps08.jpg 4.43KB
tel_16d.im 188.03KB
tel_insul_d.jpg 1.27KB
tel_insul_d.texture.txt 34 bytes
tel_metal.jpg 1.10KB
tel_metal.texture.txt 32 bytes
tel_wood.jpg 3.68KB
tel_wood.texture.txt 31 bytes
tel_16it
steps08-steps08.texture.txt 49 bytes
steps08.bmp 33.05KB
steps08.jpg 4.43KB
tel_16it.im 210.38KB
tel_insul_it.jpg 512 bytes
tel_insul_it.texture.txt 35 bytes
tel_metal.jpg 1.10KB
tel_metal.texture.txt 32 bytes
tel_wood.jpg 3.68KB
tel_wood.texture.txt 31 bytes
• telegraph_16wire.im 1.01KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.