C&HR Mikado drivers

C&HR Mikado drivers

Four axle driving bogey with 63 inch drivers with a 16 ft 9 in wheelbase. Equipped with Laird crossheads and Walscharets valve gear. This one is weathered.

XYZ coordinates for selected parts:
Center of wheelbase: 0 in, 0 in, 0 in
Axle 1: 0 in, - 100.377 in, 31.5 in
Axle 2: 0 in, - 33.67 in, 31.5 in
Axle 3 (main): 0 in, 33.785 in, 31.5 in
Axle 4: 0 in, 100.646 in, 31.5 in
Expansion links: (+ or -) 55.5 in, - 50 in, 57.5 in
Piston stroke: (+ or -) 42.75 in, - 148 in to - 182.75 in, 31.75 in
Crosshead guide (minimum): (+ or -) 42.75 in, -64.25 in to -108 in, 41.5 in

Author: Ben Neal

C&HR Mikado drivers
• 3160_drivers.texture.txt 35 bytes
• 3160_drivers.tga 3.00MB
• anim.kin 26.03KB
• atsf3160_drivers.lm.txt 298 bytes
• atsf3160_drivers_shadow.im 19.51KB
• config.txt 2.30KB
• env_metal.bmp 12.05KB
• env_metal.texture.txt 32 bytes
• lod1.im 710.76KB
• lod2.im 396.09KB
• lod3.im 28.34KB
• thumbnail.jpg 7.64KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE107: The high-detail meshes total more than 10000 polygons. This may have a negative impact on performance: 0: 12694, 1: 6932, 2: 456