Dearnby in Midwinter V2 - shunting task 1 V2

Dearnby in Midwinter V2 - shunting task 1 V2

This is a shunting task session. There is one Class 06 shunter which can be used to assemble consists from both Dearnby yards. There is a Class 20 and a Class 24, which can be used to take the assembled consists to the specified portals.

The tankers must be assembled into a tanker-only consist with one brake van at the rear. These are to go to the DOWN SLOW receiving portal. The consist must travel engine-first.
ALL vans and loaded conflats (12 in total) must be assembled into a consist with a brake van at the rear. These must go to tyhe BRANCH receiving portal. The consist must travel engine-first.

You must set points as required yourself.

Shunting may use the slow lines through Dearnby Station; and you will need to cross all four mainline tracks in assembling the two consists.

You should not unduly delay any of the many & frequent trains going to or through Dearnby Station.

Dearnby in Midwinter V2 - shunting task 1 V2
• config.txt 26.99KB
• profile.amd 32.03KB
• profile.dat 155.78KB
• profile.lyr 28 bytes
• profile.not 2.63KB
• profile_-1_0.obs 175 bytes
• profile_-1_0.trk 20 bytes
• profile_-1_0.vtx 20 bytes
• profile_-1_1.obs 20 bytes
• profile_-2_0.vtx 20 bytes
• profile_0_0.obs 457 bytes
• profile_0_0.trk 20 bytes
• profile_0_0.vtx 20 bytes
• profile_0_1.obs 20 bytes
• profile_1_0.obs 177 bytes
• profile_1_0.trk 20 bytes
• profile_1_0.vtx 20 bytes
• profile_1_1.obs 20 bytes
• profile_1_1.vtx 20 bytes
• profile_2_0.obs 20 bytes
• profile_2_0.trk 20 bytes
• profile_2_0.vtx 20 bytes
• profile_index.obs 80 bytes
• profile_index.rlr 16 bytes
• profile_index.trk 32 bytes
• profile_index.vtx 40 bytes
• thumbnail.jpg 170.82KB