Es1600 (щебень, гравий, песок)

Es1600 (щебень, гравий, песок)

Bucket chain excavators of the Es 1600 type were built between 1957 and 1965 by VEB Schwermaschinenbau G.Dimitroff for removal of overburden at lignite opencast mines. Like all large bucket chain excavators was moving on rails at speeds between 2,8 and 9,0 metres per minute. The portal was designed for loading excavated spoil into electrically driven trains of spoil cars passing on two parallel tracks underneath. The gross weight of the excavator was around 3200 tonnes. Like all machinery used with opencast lignite mines, it was electrically powered by DC supplied by a nearby power plant.
The bucket chains could be set for upward as well as downward cutting. Up to 52 metres of overburden could be removed from one level of tracks. As the designation implied, each bucket had a volume of 1600 litres. Tractive power for the bucket chains alone was 2000 kW. As the minor letter s in the type designation implies, the upper works could pivot around a vertical axis. This way the bucket chain could be adjusted to the progress of operation. After removal of about 10 m of overburden, the tracks on which the excavator and the spoil trans ran had to be relocated.
Bucket chain excavators working in conjunction with trains for removal of spoil were eventually superseded either by conveyor belt bridges or combinations of bucket wheel excavators and spreaders linked by motile conveyor belts, all of which are invariably running on crawlers.
The asset was created as an industry, which can load spoil into enabled side dumping spoil cars e.g. kuid:142675:1258, :1314, :1262, :1268. Its operation is controlled by skript.

Author: K. Bernhard

Es1600 (щебень, гравий, песок)
• $screenshot$.jpg 34.03KB
• coal_load0.wav 104.12KB
• coal_load1.wav 104.11KB
• config.txt 23.06KB
• es1600.gs 20.52KB
• es1600.tga 12.53KB
• ladung_abraum1.tfx 388 bytes
• ladung_abraum2.tfx 388 bytes
• ladung_abraum3.tfx 388 bytes
portal
drehgestelle
drehgestell.texture.txt 34 bytes
drehgestell.tga 192.04KB
drehgestelle.im 70.94KB
rad.texture.txt 26 bytes
rad.tga 192.02KB
eimerkettenbagger.texture.txt 40 bytes
eimerkettenbagger.tga 384.04KB
fabrikfenster.bmp 48.05KB
fabrikfenster.texture.txt 61 bytes
fabrikfenster.tga 48.04KB
gelaender_rot.texture.txt 36 bytes
gelaender_rot.tga 812 bytes
helper.im 580 bytes
kabel.texture.txt 28 bytes
kabel.tga 812 bytes
oberbau
dunkelgrau.texture.txt 33 bytes
dunkelgrau.tga 786 bytes
eimerkette_hoch.im 69.87KB
eimerkette_hoch.kin 33.17KB
eimerkette_tief.im 69.87KB
eimerkette_tief.kin 33.17KB
eimerkettenbagger.texture.txt 40 bytes
eimerkettenbagger.tga 384.04KB
fabrikfenster.bmp 48.05KB
fabrikfenster.texture.txt 61 bytes
fabrikfenster.tga 48.04KB
gelaender_rot.texture.txt 36 bytes
gelaender_rot.tga 812 bytes
kabel.texture.txt 28 bytes
kabel.tga 812 bytes
kreuzverband.bmp 192.05KB
kreuzverband_dunkelgrau.texture.txt 70 bytes
kreuzverband_dunkelgrau.tga 192.04KB
oberbau_hoch.im 550.16KB
oberbau_park.im 609.68KB
oberbau_tief.im 550.16KB
riffelplatte.texture.txt 35 bytes
riffelplatte.tga 48.04KB
speichenrad.bmp 48.05KB
speichenrad.texture.txt 57 bytes
speichenrad.tga 48.02KB
portal.im 599.78KB
ziffer_1.texture.txt 31 bytes
ziffer_1.tga 768.04KB
ziffer_2.texture.txt 31 bytes
ziffer_2.tga 768.04KB
• umwelt.wav 96.13KB