Road Divider

Road Divider

This is a concrete centreline road divider spline as used in Australia. The divider has tapered terminating segments to minimise vehicle impacts.

The divider is set at a height to suit the road centreline, but can be raised or lowered to any level required and may be bent to a suitable shape.

If you do not want a new segment to join to a near previous one, hold down the shift key when placing or adjusting the second segment.

This replaces a previous model for TRS compatability.

Once installed you will find it as Road Divider under splines in the Australia listing.

Author: Ian Manion (Vulcan)

Road Divider
• barrier4.texture.txt 49 bytes
• barrier4.tga 12.02KB
• config.txt 5.77KB
divider_end
barrier4.texture.txt 49 bytes
barrier4.tga 12.02KB
divider_end.im 1.84KB
light-lightop.texture.txt 79 bytes
light-lightop.tga 16.02KB
divider_start
barrier4.texture.txt 49 bytes
barrier4.tga 12.02KB
divider_start.im 2.40KB
light-lightop.texture.txt 63 bytes
light-lightop.tga 16.02KB
lightreflect.texture.txt 53 bytes
lightreflect.tga 12.02KB
night_window.tga 12.53KB
• light-lightop.texture.txt 63 bytes
• light-lightop.tga 16.02KB
• lightreflect.texture.txt 53 bytes
• lightreflect.tga 12.02KB
• readme.txt 742 bytes
• roaddivider.im 4.36KB