Small Canal Lock 5 narrow

Small Canal Lock 5 narrow

A small narrow single canal lock designed to raise small boats from one water level to another. It operates as a transfer table, with operating gates, and rising water level, it lifts boats 3 metres. This model is 7 feet (2.1 metres) wide and the lock is 20 metres long. It includes operating gates and canal walls.

The lock operates using the turntable arrows, one click will make the lock fill, to the top level of the second. When the gates open, the canal boat may drive out. Clicking on the other red arrow will reverse the loack operation. Rotate your view around the lock until you can click on the red arrows.

The rising water is a textured plane, replace this texture with your own if you want to match a particular water colour in Trainz. The lock snaps to the grid when placed, so the gates align with a grid line. Place water to finish at the gates and adjust the upstream and downstream levels to suit the up or down positions of the water level in the dock. You should use the get spline height tool to find the height of the attachment points and set the attached track to those levels.

The Move Turntable rule is useful to operate the lock.

Author: Ian Manion (Vulcan)

Small Canal Lock 5 narrow
• config.txt 4.37KB
• preview.jpg 17.49KB
trans_base
canal_apron.texture.txt 34 bytes
canal_apron.tga 193.04KB
concside.texture.txt 31 bytes
concside.tga 12.53KB
rockwall3.texture.txt 32 bytes
rockwall3.tga 192.53KB
ruststeel.texture.txt 32 bytes
ruststeel.tga 48.53KB
trans_base.im 9.01KB
wallside.texture.txt 31 bytes
wallside.tga 48.53KB
wallside2.texture.txt 32 bytes
wallside2.tga 49.04KB
trans_platform
anim.kin 180.16KB
concside.texture.txt 31 bytes
concside.tga 12.53KB
gate.texture.txt 27 bytes
gate.tga 48.53KB
gate2.texture.txt 28 bytes
gate2.tga 48.53KB
timber.texture.txt 29 bytes
timber.tga 12.53KB
trans_platform.im 18.14KB
trans_platform.kin 180.16KB
water5.texture.txt 29 bytes
water5.tga 48.53KB