Blackhawk S70A-212 Helicopter Australian Army Startup

Blackhawk S70A-212 Helicopter Australian Army Startup

This is the Sikorsky (Hawker de Havilland licenced manufacturer) Blackhawk S70A-9 helicopter 212 in the livery of the Australian Army.

The aircraft initially has the engines stopped. Use the B key to start or stop the engines. For AI operations, use the Aircraft Engine Start Rule, kuid2:60238:80004:1 and for lift off use the Aircraft Helicopter Takeoff Rule, kuid2:60238:80005:1.

The pilot is initially outside the aircraft, and the door is open. On using the B key, the pilot will get in the aircraft and close the door, and then start the engines for takeoff. The helicopter will lift and hover above the track, using the H key - use the H key again to lower the helicopter. Maximum hover height is 15 metres, variable in the string table above, default setting 10 metres. When stopping the engines, the pilot will open the door and get off the aircraft.

It does not have an operating interior, but does have various exterior views based on an invisible interior, use the [ and ] keys from the interior view. The aircraft will load and unload passengers at suitable airports. The left front door will open automatically for passengers and can also be manually operated using the V key (trigger number 3 setting).

The Aircraft Action Trigger, kuid:76656:24050 when placed on track and set to the correct number will operate the following:

- initially the rotors are stationary, use the B key or triggger setting 2 to start or stop the rotors;
- the helicopter will lift and hover above the track, using the H key or trigger setting 1 - use the H key again to lower the helicopter;
- maximum hover height is 15 metres, variable in the string table above, default setting 10 metres;
- the mid doors will open manually using the V key (trigger number 3 setting) or automatically to load passengers.

Military and commercial aircraft sometimes use the same keys and trigger settings for differerent animations. If you find conflict on the same route, set the train priority of the trigger and the particular aircraft to a different value to differentiate.

Author: Ian Manion (Vulcan)

Blackhawk S70A-212 Helicopter Australian Army Startup
• aircraft70.gse 2.73KB
body
base.im 1.52KB
base.kin 14.28KB
body.im 476.56KB
body_aust.texture.txt 32 bytes
body_aust.tga 3.00MB
env_metal.bmp 12.05KB
env_metal.texture.txt 32 bytes
figure3.texture.txt 30 bytes
figure3.tga 769.04KB
front_door_left.im 12.50KB
front_door_left.kin 2.46KB
glass.texture.txt 28 bytes
glass.tga 13.04KB
main_doors.im 35.40KB
main_doors.kin 3.40KB
night.im 9.56KB
pilot_ground.im 25.54KB
pilot_main.im 25.54KB
rotor_main.im 30.47KB
rotor_main.kin 2.46KB
rotor_tail.im 12.91KB
rotor_tail.kin 2.47KB
shadowblack.texture.txt 34 bytes
shadowblack.tga 812 bytes
• config.txt 10.04KB
• door.wav 21.50KB
• engine.wav 285.01KB
• preview.jpg 13.43KB
shadow
shadow.im 1.33KB
shadowblack.texture.txt 34 bytes
shadowblack.tga 812 bytes
• start.wav 814.71KB
• stop.wav 814.71KB
• turbine.wav 599.25KB