Australian Banner Signal

Australian Banner Signal

<kuid2:68236:24101:2>

Author: Magandy
Kind: mosignal
Build: 2.0
Size: 634.46KB
Uploaded: 2011-04-16
Web-site: magandy.net
Loadings:
9
-
0
+

Australian Banner Signal

The banner signal was invented by W R Sykes & Co around 1900 as electrical operation of signalling was beginning to become a practicality.
The arm of the signal rotated on an opaque disc in an enclosed glass case, allowing lightweight operation in a clean environment. many early examples had red-coloured 'arms' and were used in place
of conventional signals at locations of poor lighting or limited clearance. However, with the arm being around a third of the size of a normal signal, they weren't really suitable for use on higher-speed
sections of line.However,unlike many adventurous signal designs, the banner signal did not become extinct. Instead, it was adopted nationwide as a 'repeater' signals, to show the position of a signal ahead
which might be obscured by station buildings or a bridge. Red-coloured arms continued to be used, initially, but around 1924 a change was made to using yellow arms for repeaters. The now universally accepted
use of black arms was introduced in 1929.This principle of repeating signal indications survives to this day - even in areas of colour light signalling - although the majority have now been replaced by
fibre-optic light signals which give the same indications without any moving parts.

Author: Magandy

    Australian Banner Signal
  • black.texture.txt 28 bytes
  • black.tga 3.53KB
  • concrete 2.texture.txt 33 bytes
  • concrete 2.tga 768.53KB
  • config.txt 3.60KB
  • ladder alpha.bmp 24.05KB
  • ladder-ladder alpha.texture.txt 53 bytes
  • ladder.tga 24.53KB
  • lightgrey.texture.txt 32 bytes
  • lightgrey.tga 12.53KB
  • magandyrepeater.gs 3.06KB
  • repeater_signal.im 15.31KB
  • repeater_signal.kin 940 bytes
  • signal red.texture.txt 33 bytes
  • signal red.tga 12.53KB
  • white2.texture.txt 29 bytes
  • white2.tga 13.04KB

VE48: This asset uses an obsolete trainz-build number. Trainz-build numbers below 3.5 are no longer supported.
VE62: Required container 'thumbnails' is missing.
VE39: The texture 'black.tga' is a uniform color.
VE39: The texture 'signal red.tga' is a uniform color.

User photos

No one has added a photo of this object yet