RRC 1a RussiansAreComing

RRC 1a RussiansAreComing

This session is for RiversideRailroadCompany 1a. It uses Russian rolling stock downloaded from external sites:
Locos:
http://www.users.on.net/~pskene/USSR_Loco_RZD%202M62U-0073.cdp
Hoppers:
http://railroadsim.net/?mod=download&cat=35&getfile=55
8-axle tank cars:
http://railroadsim.net/?mod=download&cat=27&getfile=34
Flat cars:
http://railroadsim.net/?mod=download&cat=28&getfile=29
Cranes:
http://railroadsim.net/?mod=download&cat=50&getfile=124
http://railroadsim.net/?mod=download&cat=50&getfile=123

The rar files can be unpacked using WinZip 11 or better, or IZArc. Please do not be discouraged by the need to download, unpack and install. These are all outstanding items of rolling stock.

Dispatcher here. Vladimir and Yuri, thanks for your help in commissioning the rolling stock we purchased from the former USSR. Before you leave, if I could ask one more favour - a couple of gondolas have jumped the track at Silos and there is an urgent need for furnace oil at Fingers Foundry.
Refuel you locomotives at Diaspar Loco, then you should assemble the consist in the order locomotives, empty ballast hoppers, tank cars, cranes and match trucks, and flat cars. Make sure the flat cars are loaded with replacement rails and sleepers from the MoW depot.
Head south to Silos, unload the rails and sleepers and position the cranes to help with re-railing of the gondolas and repair of the track.
Head south, leave the tank cars in the fuel spur at Fingers and swap the empty ballast hoppers for loaded ones at the Bulk Terminal at Lys. Return with the ballast hoppers to Silos.
If you are running close to time, go light engine to Lys Loco where I will arrange a relief crew. Otherwise return the crane, match trucks and flats to MoW Diaspar.
Class 1 railroad trains will be running at 4 minute intervals.
You are authorised to travel at up to 45mph except in yard areas where normal limits apply.
You are authorised to stop when necessary for locomotive purposes.
Ends.

Note: After coupling to the cranes you may find that the reverser on the locomotives will refuse to function until the

Author: philskene

RRC 1a RussiansAreComing
• config.txt 4.63KB
• diaspar_1.jpg 90.58KB
• diaspar_2.jpg 90.26KB
• diaspar_3.jpg 87.94KB
• lys_1.jpg 88.54KB
• lys_2.jpg 89.77KB
• lys_3.jpg 89.23KB
• profile.dat 975.19KB
• readme.htm 13.71KB
• readme.txt 12.69KB
• riversiderailroadco_map.jpg 89.54KB
• rrc_russiansarecoming_small.jpg 19.17KB