VR Timber Trestle Bridge Kit Decking w Single Gangway - 1b

VR Timber Trestle Bridge Kit Decking w Single Gangway - 1b

This is the Main Decking Section of the VR Timber Trestle Bridge Kit with the additon of a standard Shunter's Gangway, on one side ONLY, provided with a Timber Handrail (as opposed to it's counterpart, which is provided with a Steel Angle-Iron Handrail), provided to allow for the creation of a bridge of this design, where it might be located close to a yard (or on a ''Shunting Neck'') and requires this feature. Because it is NOT supplied with proper ''End-Caps'', this asset should ONLY be used in conjunctiion with the ''VR Timber Trestle Bridge Kit Abutment'' ,<kuid2:75943:3:1>, included in this asset's kuid-table tag, as well as any of the other components of the ''VR Timber Trestle Bridge Kit'' as may be appropriate, all available separately, by the same author). If it is desired, the direction of the spline may be reversed to 'place' the Gangway on the opposite side of the bridge. Because the asset utilises LOD, it is unsuitable for Trainz builds below 2.9.

VR Timber Trestle Bridge Kit Decking w Single Gangway - 1b
• $screenshot$.jpg 29.09KB
• bridge.im 179.99KB
• config.txt 3.29KB
• p1010201.texture.txt 31 bytes
• p1010201.tga 49.04KB
• rusty_panel4.jpg 40.92KB
• rusty_panel4.texture.txt 35 bytes
• wood_plank_painted_white.texture.txt 47 bytes
• wood_plank_painted_white.tga 769.04KB