VR Timber Trestle Bridge Kit 50Ft-Tower Braced

VR Timber Trestle Bridge Kit 50Ft-Tower Braced

This is the 50Ft. (15 meter) high tower portion of a nine piece kit intended to create a wooden style Trestle Bridge as designed and built by the Ways and Works Branch of the Victorian railways from 1935. This tower is intended to raise the bridge to a height no greater than 55Ft. (17 meters) above the ground. It is constructed from two adjacent 50Ft. piers placed 20Ft. apart that are braced with diagonal outside timbers for greater stability. The tower should be used in locations where two 50Ft. single piers would normally stand adjacent to one another, instead of the two piers and adjacent towers must stand one 20Ft. span apart.

Once installed, this part of the kit can be found in the Rails Tab>Trackside>Australia>Bridge section in Surveyor.

Many thanks to andi06 for his assistance in creating this kit.

Author: Jerker [Garry Jenkinson]

VR Timber Trestle Bridge Kit 50Ft-Tower Braced
• $screenshot$.jpg 29.09KB
• config.txt 3.31KB
• p1010201.texture.txt 31 bytes
• p1010201.tga 49.04KB
• vr_timber_trestle_bridge_kit_50ft-tower_braced.im 124.25KB