VR Single Track 30ft Steel Girder Concrete Deck Bridge Kit Abutment with Straight Wing Walls

VR Single Track 30ft Steel Girder Concrete Deck Bridge Kit Abutment with Straight Wing Walls

This is the Abutment portion (supplied with attached 'Straight' Wing Walls) of a nine piece kit intended to create a Concrete style Bridge as designed and built by the Ways and Works Branch of the Victorian railways from 1945. This abutment is intended to form the anchor point of the bridge and to provide an attachment point for both the track used across the bridge and the spline that forms the bridge, itself. The part supports TRS 2004 rotation and Height Adjustment and comes complete with a 50 ft (15 meter) pier and a 30 ft (10 meter) span. The Abutment requires, as dependants, the VR Single Track 30ft Steel Girder Concrete Deck Bridge Kit Spline <KUID2:75943:30250>, the VR Concrete Workman's Safety Refuge <KUID2:75943:302??> and the AJS Invisible Track spline <KUID:122285:1003>, which acts as the attachment point for the track spline selected by the user and which automatically updates to any track attached to it and which shows the intended (and correct) direction for laying the track.

Once installed, this part of the kit can be found in the Objects Tab>Objects>Australia>Bridges section in Surveyor.

Author: Garry Jenkinson (Jerker)

VR Single Track 30ft Steel Girder Concrete Deck Bridge Kit Abutment with Straight Wing Walls
• $screenshot$.jpg 43.40KB
• config.txt 3.38KB
• medrust3.texture.txt 31 bytes
• medrust3.tga 49.04KB
• oz_cretetunnel.texture.txt 37 bytes
• oz_cretetunnel.tga 49.04KB
• oz_grassbrush.texture.txt 36 bytes
• oz_grassbrush.tga 49.04KB
• plateox2.texture.txt 31 bytes
• plateox2.tga 49.04KB
• single_track_abutment_with_straight_wing_walls.im 58.34KB