Log Dump C

Log Dump C

Part C Steam powered and permanently mounted A-frame unloader for use with log dump set. This section is placed as required with the other parts of the log dump set. Ensure spacing is correct by viewing the donkey exhaust stack from above and checking that it is not ovalized. Adjust length as required to make the donkey stack evenly round. Can be placed on shallow water or (preferred) with rear of donkey deck at water's edge with tie-back spar fully on land. There is enough room between the donkey deck and the tie-back spar to run a spur track if necessary. This spline should be exactly 6meters in length. Maximum height is 10m above absolute ground. Modified textures are homegrown and from originals by P.Pardoe-Matthews and Mike Sutton, used with permission. Uses the 3 ft No Ballast track from Mike10 Kuid 35412 38066

Author: Rich Blake

Log Dump C
• chain-chain_alpha.texture.txt 51 bytes
• chain.bmp 1.55KB
• chain_alpha.bmp 1.55KB
• chain_alpha.texture.txt 34 bytes
• config.txt 3.22KB
• log_dump_c.im 109.25KB
• pulley1_64.texture.txt 33 bytes
• pulley1_64.tga 12.02KB
• sg_colour4-64.bmp 12.05KB
• sg_colour4-64.texture.txt 36 bytes
• sg_colour4b-64.bmp 12.05KB
• sg_colour4b-64.texture.txt 37 bytes
• sg_roof-iron11-64.bmp 12.05KB
• sg_roof-iron11-64.texture.txt 40 bytes
• sg_surface100-16.bmp 822 bytes
• sg_surface100-16.texture.txt 39 bytes
• sg_surface58-64.bmp 12.05KB
• sg_surface58-64.texture.txt 38 bytes
• sg_timber37-64.bmp 12.05KB
• sg_timber37-64.texture.txt 37 bytes
• sg_timber42c-128.bmp 48.05KB
• sg_timber42c-128.texture.txt 39 bytes
• swivel-swivel_alpha.texture.txt 53 bytes
• swivel.bmp 822 bytes
• swivel_alpha.bmp 822 bytes
• yellowpine_2_128.texture.txt 39 bytes
• yellowpine_2_128.tga 48.02KB