SB- 3 - Signalman Training 3 - Locomotive Control

SB- 3 - Signalman Training 3 - Locomotive Control

Welcome to Longport Junction Signal Box for the third of three training sessions for signalmen on the LMS.

In this session you will learn more about the signal box controls.

This session focuses on the control of a locomotive from the signal box. This feature is particularly useful when conducting shunting operations. You will learn how to take control of a locomotive, drive it from the box or from its cab, and control points (junctions) as necessary for the task at hand.

In this session we will leave the signal box switched OUT OF LINE so that it monitors Main Line traffic automatically. The signal box will also manage the signals.

You may choose to switch the box IN LINE. You will then also need to operate the block instruments and signals as well as control your shunting operation. This can become a bit of a handful, particularly if the Main Line gets busy.

SB- 3 - Signalman Training 3 - Locomotive Control
• config.txt 200.77KB
• profile.dat 1.66MB
• profile.lyr 46 bytes
• profile.obs 10.96KB
• profile.rlr 36 bytes
• profile.trk 240 bytes
• st3.jpg 15.85KB